Sand making machine is an important mechanical sand making equipment. The sand making machine is suitable for the crushing and shaping of soft or hard and hard materials, and is widely used in all kinds of ore, cement, refractory material, aluminum ground clinker, emery sand, glass material, mechanism sand, stone and various metallurgical slag, especially hard, hard and abrasion resistant materials such as emery, sintered bauxite and sand. It is more efficient than other types of crusher.
In the process of production, the sand making machine has a certain body swing, but the amplitude is small, if the body swings are particularly violent, then there may be three reasons.
(1) it may be that the worn parts on the impeller of the sand making machine are seriously worn out. If the abrasion of the impeller on the impeller is badly worn, the internal running of the machine will be unstable and the swinging is too large, so only the changing parts can be replaced at this time, so that the inner impeller of the sand machine can reach the balance state.
(2) it may be that the equipment wobble over a large amount of material. When the machine is designed, the feed size of the equipment is generally 4 to 5 centimeters. Generally, the amount of finished sand can be reached when the grain size of the equipment is 3 to 4 centimeters. If the feed is over the assembly, the equipment wobble too much, and if the feed is too small, the collision is broken. It is not enough to reach the finished sand volume.
(3) the sand machine is also likely to be a blockage in the impeller flow channel. If the impellers have obstructions, it will cause inhomogeneous feed, and the body swings too much. As long as the blocking objects on the impeller flow passage are removed, the problem of the body's swinging can be solved.
In the process of production, the sand making machine has a certain body swing, but the amplitude is small, if the body swings are particularly violent, then there may be three reasons.
(1) it may be that the worn parts on the impeller of the sand making machine are seriously worn out. If the abrasion of the impeller on the impeller is badly worn, the internal running of the machine will be unstable and the swinging is too large, so only the changing parts can be replaced at this time, so that the inner impeller of the sand machine can reach the balance state.
(2) it may be that the equipment wobble over a large amount of material. When the machine is designed, the feed size of the equipment is generally 4 to 5 centimeters. Generally, the amount of finished sand can be reached when the grain size of the equipment is 3 to 4 centimeters. If the feed is over the assembly, the equipment wobble too much, and if the feed is too small, the collision is broken. It is not enough to reach the finished sand volume.
(3) the sand machine is also likely to be a blockage in the impeller flow channel. If the impellers have obstructions, it will cause inhomogeneous feed, and the body swings too much. As long as the blocking objects on the impeller flow passage are removed, the problem of the body's swinging can be solved.
评论
发表评论